MOT Type 1
MOT Type 1 is a graded crushed aggregate, typically ranging from 0 to 40mm, produced in accordance with the Specification for Highway Works. Its carefully controlled particle-size distribution allows the material to compact into a dense, stable layer, providing a strong and reliable foundation with minimal voids.
It is commonly used in applications where the sub-base needs to provide structural support and withstand regular loading, including roads, car parks, footpaths, hardstanding areas and piling mats.
6F2 recycled aggregate
6F2 is a coarser recycled aggregate, typically containing material up to 125mm in size. It is commonly used as a capping material to improve ground conditions and build up levels, particularly where the underlying ground is weak or unsuitable for direct construction.
While generally more economical per tonne than Type 1, 6F2 serves a different purpose and should not be considered a direct substitute. It is typically used as a lower capping layer, with a suitably specified Type 1 layer installed above to provide a finished, compacted sub-base.
Choosing the right material
Selecting the correct aggregate is essential to achieving the required ground stability, load-bearing capacity and long-term performance.
- MOT Type 1: Best suited to structural sub-base applications where a well-compacted, load-bearing surface is required.
- 6F2: Ideal for building up levels and providing a capping layer over weaker ground conditions.
- Combined application: Where ground conditions require it, 6F2 can be used as a lower capping layer, with Type 1 installed above to provide the required sub-base specification.
Using 6F2 as a direct replacement for Type 1 beneath a trafficked surface can result in the material failing to meet the required specification. Correct material selection should always be guided by the project design and ground conditions.
Recycled vs primary aggregate
Both MOT Type 1 and 6F2 can be produced using recycled materials recovered from demolition projects, offering a more sustainable alternative to relying solely on primary quarried aggregates.
At Demex, we process and screen suitable demolition arisings on site, producing reusable aggregates close to where they are required. This reduces the need to transport waste away from site and bring replacement primary materials back in, helping to minimise vehicle movements, transport costs and associated carbon emissions.
Our recycled aggregates are processed to meet the relevant material specifications, with testing carried out to verify their suitability for the intended application. Test results can be provided alongside quotations, giving clients confidence in the quality and consistency of the materials supplied.