Crushed concrete stockpiled for reuse as fill

Recycled aggregates and on-site crushing

Concrete and masonry processed on site through crushing and screening, ready for reuse as fill material and piling mat.

Crushed concrete stockpiled for reuse as fill

Recycled Aggregates

Turning demolition waste into resources

Every load of hardcore that leaves a site is paid for twice: once to take it away, and again to bring primary aggregate back in. On most demolition jobs that is avoidable.

We crush and screen on site with mobile plant, producing material that goes straight back down as fill or piling mat. Fewer wagon movements, a lower bill, and a recycling rate that stands up to scrutiny.

What we do

Our recycled aggregates services

Mobile crushing

Mobile crushing plant brought directly to site, reducing the need to transport materials off site for processing.

Screening

Processed and graded to meet the requirements of the next stage of construction.

6F2 and Type 1 aggregate

Produced to the required specifications, with testing carried out where necessary to ensure quality and suitability.

Reused within the project

Recycled aggregate reused on site for fill, capping and piling mat, reducing the need for imported materials.

Surplus material put to use

Any excess recycled aggregate is made available for use on other projects, ensuring materials are put to good use rather than wasted.

Fewer movements

Fewer loads taken off site for disposal and less imported primary aggregate required.

How it runs

How our recycled aggregates projects run

  1. Assess

    What is in the structure and what it will make once it is crushed.

  2. Set up

    Mobile crusher and screen positioned to suit the demolition sequence.

  3. Produce

    Crushed and graded as the structure comes down.

  4. Place

    Straight back down on site, or loaded out if there is surplus.

In detail

Reducing off-site disposal

Hardcore that leaves site gets paid for twice

Every load of hardcore that leaves a demolition is paid for twice: once to take it away and again to bring primary aggregate back in. On most jobs that is avoidable. Crushing where the material stands removes both halves of that cost and takes a large number of wagon movements off the road at the same time.

What mobile crushing and screening produces

Concrete and masonry are crushed and screened on site to recognised specifications including 6F2 and Type 1, subject to what the structure actually yields. Material is tested where the specification calls for it, and we will say up front if what is coming out is unlikely to meet it rather than discovering that later.

Straight back down as fill and piling mat

Most of what we produce goes back down on the same site as fill, capping or piling mat, subject to the engineer’s requirements. Where there is more than the site needs, surplus is loaded out to other contracts rather than tipped, which keeps both the cost and the carbon down.

Specification, testing and quality control

Material produced on site is graded against recognised specifications, most commonly 6F2 and Type 1, subject to the composition of the structure being demolished. Where the specification requires it, samples are tested and results provided before material is placed. Contaminants such as timber, plasterboard and reinforcement are removed during processing, and we will advise at survey stage where the structure is unlikely to yield material meeting the required specification, so that an alternative can be designed in rather than discovered during construction.

Reducing transport, costs and carbon emissions

On-site processing significantly reduces the need for transporting demolition materials off site and importing replacement primary aggregate. On larger projects, this can eliminate hundreds of vehicle movements, helping to lower transport costs, reduce carbon emissions and minimise disruption to surrounding roads.

Reusing materials also reduces reliance on quarried aggregates, supporting a more sustainable approach to resource management. Where projects have carbon reporting requirements, the benefits can be demonstrated through recorded material tonnages, quantities reused on site and vehicle movements avoided.

Where we work

Recycled aggregate supply across the UK

Mobile crushing plant travels to site from Rotherham, serving contracts nationwide.

  • Rotherham
  • Sheffield
  • Doncaster
  • Barnsley
  • Leeds
  • Wakefield
  • Bradford
  • York
  • Hull
  • Manchester
  • Liverpool
  • Newcastle
  • Nottingham
  • Derby
  • Birmingham
  • London

Questions

Recycled Aggregates FAQs

What can you produce on site?

Crushed and screened material including 6F2 and Type 1, subject to what the structure actually yields.

Is the material tested?

Where the specification calls for it, yes, and we will tell you up front if what is coming out is unlikely to meet it.

Can it be used as a piling mat?

Commonly, subject to the engineer’s requirements for the specific site.

What if there is more than the site needs?

Surplus is loaded out to other jobs rather than tipped, which keeps the cost and the carbon down.

Get in touch

Tell us what needs to come down

Send a drawing, a site address or a photo on your phone and we will come back with a price.